Local Intelligent Analysis
Note: This function is applicable for PoE NVRs only. It is not applicable for
non-PoE NVRs.
The local intelligent analysis is for NVR to manage the local intrusion
alarm.
1. Go to Main Menu > Event > Local Intelligent Analysis.
The Local Intelligent Analysis interface is displayed.
Figure 73 Local Intelligent Analysis
2. Configure parameters.
Table 22 Local Intelligent Analysis Parameters
Parameter
Enable
Enable draw rect
Mode
Channel
3. Click APPLY to complete settings.
Note: If you enable or disable the intrusion and modify the channels, the
device will be reboot.
Intrusion
The intrusion refers to that an alarm is generated when the targets of
specified types (such as person, car, and both person and car) enter the
deployment area.
60
Description
Enable this function and then you can set the parameter of alarm.
Enable draw rectangle, the detection rectangle will be showed on
the live video of intrusion.
Choose detection mode.
Choose the channels
Up to 4 channels to be chosen.
Honeywell 35 Series Network Video Recorder User Guide