Radiator Replacement - Honda Accord 2008 Manual

07/11/02 09:13:54 61TA0000_100_0017

Radiator Replacement

1. Do the battery removal procedure (see page 22-90).
2. Remove the harness clamps, then remove the
battery base (see step 7 on page 5-3).
3. Remove the front grille cover:
• 2-door (see page 20-255)
• 4-door (see page 20-255)
4. Remove the water separator (A) and the intake air
duct (B).
＊０３
5. Drain the engine coolant (see page 10-6).
6. Remove the splash shield (see step 24 on page 5-5).
7. A/T model: Remove the automatic transmission
fluid (ATF) cooler hoses (A) (see step 19 on page
14-245).
＊０１
B
8. Remove the lower radiator hose (B) from the
radiator.
A
9. Disconnect the fan motor connectors (A) and
engine coolant temperature (ECT) sensor 2
connector (B), then remove the harness clamps (C).
A
B
C
10. Remove the upper radiator hose (A), the upper
brackets (B), and the coolant reservoir (C).
A
A
11. Remove the radiator.
ＴＡ０８ＡＥ４Ａ１４４０００４９００１ＫＢＡＴ００
B
A
B
C
(cont'd)
10-17
＊０２
＊０４