07/11/02 09:04:50 61TA0000_040_0010
Clutch Interlock Switch Test
M/T model
1. Disconnect the clutch interlock switch 2P connector
(A).
*01
Terminal side of
male terminals
2. Remove the clutch interlock switch (B).
3. Check for continuity between the terminals
according to the table.
• If the continuity is not as specified, replace the
clutch interlock switch.
• If OK, install the clutch interlock switch and
adjust the pedal height (see page 12-7).
*02
Position
Clutch Interlock Switch
Clutch Interlock Switch
TA08AEAA46500017021FEAT00
A
B
Terminal
1
(PRESSED)
(RELEASED)
2
4-9