Oil Pressure Switch Test; Oil Pressure Switch Replacement - Honda Accord 2008 Manual

07/11/02 09:11:19 61TA0000_080_0008
Engine Lubrication

Oil Pressure Switch Test

1. Disconnect the oil pressure switch connector (A)
from the oil pressure switch (B).
＊０１
2. Check for continuity between the oil pressure
switch terminal and the engine (ground). There
should be continuity with the engine stopped.
There should be no continuity with the engine
running.
8-8 8-8
ＴＡ０８ＡＥ４Ａ３２２０００４３４６１ＦＥＡＴ０１
A
B

Oil Pressure Switch Replacement

1. Disconnect the oil pressure switch connector (A),
then remove the oil pressure switch (B).
A
2. Remove any old liquid gasket from the switch and
switch mounting hole.
3. Apply a very small amount of liquid gasket to the
oil pressure switch threads, then install the oil
pressure switch.
NOTE: Using too much liquid gasket may cause
liquid gasket to enter the oil passage or the end of
the new oil pressure switch.
ＴＡ０８ＡＥ４Ａ３２２０００４３４６１ＫＢＡＴ０２
B
18 N·m
(1.8 kgf·m, 13 lbf·ft)
＊０１