Connecting Rod And Crankshaft End Play Inspection - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:09:27 61TA0000_070_0005

Connecting Rod and Crankshaft End Play Inspection

1. Remove the oil pump (see page 8-16).

2. Remove the baffle plate (see step 8 on page 7-15).

3. Measure the connecting rod end play with a feeler

gauge between the connecting rod and the

Connecting Rod End Play

Standard (New): 0.15 0.35 mm (0.006 0.014 in.)

Service Limit:

4. If the connecting rod end play is beyond the service

limit, install a new connecting rod, and recheck. If it

is still beyond the service limit; replace the

crankshaft (see page 7-15).

0.40 mm (0.016 in.)

5. Push the crankshaft firmly away from the dial

indicator, and zero the dial against the end of the

crankshaft. Then pull the crankshaft firmly back

toward the indicator; the dial reading should not

exceed the service limit.

Crankshaft End Play

Standard (New): 0.10 0.35 mm (0.004 0.014 in.)

Service Limit:

0.45 mm (0.018 in.)

6. If the end play is beyond the service limit, replace

the thrust washers and recheck, if it is still beyond

the service limit, replace the crankshaft (see page

ＴＡ０８ＡＥ４Ａ１８３１６２０００００ＭＡＡＴ００

Table of Contents