Radiator And Fan Replacement - Honda ACCORD HYBRID 2005 Service Manual

Cooling System
R a d i a t o r a n d F a n R e p l a c e m e n t
1. Drain the engine coolant (see page 10-6).
2. Remove the front grille cover (see step 1 on page 20-111).
3. Remove the automatic transmission fluid (ATF) cooler hoses f r o m the radiator (see page 14-256). Remove the
upper radiator hose and lower radiator hose f r o m the radiator.
U P P E R R A D I A T O R H O S E
L O W E R R A D I A T O R H O S E
R A D I A T O R F A N
5.4 N m
(0.55 k g f m , 4.0 Ibf-ft)
R A D I A T O R F A N S H R O U D
6 x 1.0 m m
7.1 N m
(0.72 k g f m , 5.2 Ibf-ft)
6 x 1.0 m m
9.8 N m
(1.0 k g f m , 7.2 Ibf-ft)
U P P E R B R A C K E T S
A N D C U S H I O N S
R A D I A T O R
L O W E R C U S H I O N S
6 x 1.0 m m
1 2 N - m
(1.2 k g f m , 8.7 Ibf-ft)
6 x 1.0 m m
7.1 N m
(0.72 kgf m , 5.2 Ibf-ft)
A / C C O N D E N S E R F A N /
S H R O U D A S S E M B L Y
A / C C O M P R E S S O R C L U T C H
C O N N E C T O R
4. Disconnect the fan m o t o r connectors. Remove the harness clamps and A/C compressor clutch connector.
5. Remove the upper bracket cushions, then pull up the radiator.
6. Remove the fan shroud assemblies and other parts f r o m the radiator.
7. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
8. Fill the radiator w i t h engine coolant, then bleed the air f r o m the cooling system (see step 8 on page 10-7).
10-12