Radiator Cap Test; Radiator Test - Honda Accord 2008 Manual

07/11/02 09:13:45 61TA0000_100_0003

Radiator Cap Test

1. Remove the radiator cap (A), wet its seal with
engine coolant, then install it on a commercially
available pressure tester (B).
＊０１
2. Apply a pressure of 93 123 kPa
(0.95 1.25 kgf/cm , 14 18 psi).
3. Check for a drop in pressure.
4. If the pressure drops, replace the radiator cap.
ＴＡ０８ＡＥ４Ａ１４４０００４９２０１ＦＥＡＴ０１
B
−
2
− −

Radiator Test

1. Wait until the engine is cool, then carefully remove
the radiator cap and fill the radiator with engine
coolant to the base of the filler neck.
2. Attach a commercially available pressure tester (A)
to the radiator, and apply a pressure of 93 123 kPa
A
(0.95 1.25 kgf/cm , 14 18 psi). −
A
3. Inspect for engine coolant leaks and a drop in
pressure.
4. Remove the tester, and reinstall the radiator cap.
5. Check for engine oil in the coolant and/or coolant in
the engine oil.
ＴＡ０８ＡＥ４Ａ１４４０００４９００１ＦＥＡＴ０２
−
2
−
10-3 10-3
＊０１