Standards And Service Limits; Engine Electrical; Engine Assembly - Honda Accord 2008 Manual

07/11/02 09:02:39 61TA0000_020_0002

Standards and Service Limits

Engine Electrical

Item
Ignition coil Rated voltage
Firing order
Spark plug Type
Gap
Ignition timing At idle
Check the
Drive belt Tension
Alternator Output
Coil (rotor) resistance
Slip ring O.D.
Brush length
Brush spring tension
Starter Output
Commutator mica depth
Commutator runout
Commutator O.D.
Brush length

Engine Assembly

Item
Compression Pressure
Check the engine with the starter
cranking
2-2
ＴＡ０８ＡＥ４００００００００００００ＮＤＡＴ０１
Measurement Qualification
All models
except PZEV
PZEV model
M/T in neutral
red mark A/T in N or P
At 13.5 V and
normal engine
temperature
At 68 °F (20 °C)
Measurement Qualification
Minimum
Maximum
variation
Standard or New
12 V
1 3 4 2 − − −
NGK: ILZKR78B-11S
DENSO: SXU22HCR11S
NGK: DILZKR7A11GS
1.0 1.1 mm (0.039 0.043 in.) − −
8 2 ° BTDC ±
8 2 ° BTDC ±
Auto-tensioner
105 A
2.5
14.4 mm (0.57 in.)
10.5 mm (0.41 in.)
3.2 N (0.33 kgf, 0.7 lbf)
1.6 kW
0.4 0.5 mm (0.016 0.020 in.) − −
0.02 mm (0.001 in.) max.
− −
28.0 28.1 mm (1.10 1.11 in.)
− −
11.1 11.5 mm (0.440 0.450 in.)
Standard or New
930 kPa (9.5 kgf/cm , 135 psi) 2
2
200 kPa (2.0 kgf/cm , 28 psi)
Service Limit
―――
14.0 mm (0.55 in.)
1.5 mm (0.06 in.)
0.15 mm (0.006 in.)
0.05 mm (0.002 in.)
27.5 mm (1.08 in.)
4.3 mm (0.17 in.)