Connections; Assignment - Honeywell ACS-8 Installation Instructions Manual

Installation Instructions / ACS-8

16. Connections

16.1 Assignment

4 The standard factory settings of the inputs and outputs are detailed in this overview. However, different arrangements can be used
if required. In this case, the new assignments for each ACS-8 controller should be filled on a copy of the empty terminal
assignment table in the appendix and stored with the controller it relates to.
4
The readers for door 3 and 4 are to be connected via the module bus and must be used in
RS 485 mode. If less than 4 doors are controlled via the onboard hardware, the free inputs
and outputs can be used for other purpose, e. g. as alarm or tamper relay.
93