Installing The Interface - Honeywell ACS-8 Installation Instructions Manual

52
6. The commissioning of the device is described in chapter 11. The individual steps to be carried out
while the cover housing is open must be followed. Then replace the housing cover and secure it with
the housing screws.
9.3

Installing the interface

Read all documentation accompanying the
interface.
Switch the power supply off.
Antistatic handling precautions should be used
when fitting the interface PCB.
Hold the interface by gripping only the sides and
avoid touching the connectors.
Insert the interface. See illustration.
Secure the interface with the screw provided.
It is recommended that any batteries are only fitted when commissioning the system.
Installation Instructions / ACS-8