Honeywell ACS-8 Installation Instructions Manual page 80

80
Meanings:
Setup from:
******************************************************************************
**
******************************************************************************
Setup from: APPL.-Login.
Label: [<no-name...>]
1. Communication
2. System
3. Save
4. Exit
No.:_
Shows the mode by which the setup was called.
APPL.-Login = Application login. The setup was called during the normal operation

of the ACS-8.
BOOT-Login The setup was called during reset of the ACS-8.

If the entry cea [Enter] is not performed within the time limit during reset,
the APPL.-Login is called.
Enter the following in lower case:

cea
and confirm with Enter. This input is not displayed on the
screen. In case of false entries, press the backspace key
several times to delete the keyboard - input buffer.
This will open the ACS-8 setup:
SETUP - ACS8
The entry cea [Enter] must be performed within 3 seconds of the
start of the ACS-8 reset process. During this time the LED 1 lights
green (located on the CPU board on the left-hand side of the heat
sink, see 15.1).
Installation Instructions / ACS-8
**