Honeywell ACS-8 Installation Instructions Manual page 27

Installation Instructions / ACS-8 27
Result:
The current consumption above allows a maximum cable length of 24.6m for the power supply of the module
electronics. The number of wires for the door strike must be determined. A J-Y(St)Y 8x2x0.6mm cable must
be used if the power for the door strike is carried in the same cable as the power supply for the bus modules.
For the data bus, a separate J-Y(St)Y or Cat 5 cable is required, because there are no spare conductors
available In the power cable.