Honeywell ACS-8 Installation Instructions Manual page 58

58
Example in IQ MultiAccess:
In IQ NetEdit:
a) Logical view
b) Select controller
c) Reset alarms/notifications
d) Select alarm to reset.
or in IQ MultiAccess (as of V7):
a) Controllers / terminals
b) Select controller
c)"Common" tab
d) Reset alarms/notifications
e) Select alarm to be reset
The "Tamper" LED of the ACS-8 extinguishes.
2. Pull lithium battery off plastic holder.
3. Insert new battery.
4. Reconnect the removed cables and close the device.MultiAccess for Windows or IQ MultiAccess
displays "Battery ok". If necessary repeat "Reset Alarms".
Installation Instructions / ACS-8