Honeywell ACS-8 Installation Instructions Manual page 84

84
2. System:
3. Save:
4. Exit:
Network device:
Example:
The items on this menu offer the following possibilities:
1. Software version
2. Init/Erase component
No.: _
Software version:
Init / Erase component: This menu item makes it possible to delete or reinitialize
If the modifications made are to be saved, this menu item must be selected before
quitting the setup using the Exit menu option.
(See 3. Save.) If this menu item is selected without first saving the settings, all
changes will be lost and the original settings are kept.
The setup and its consequences remain active until the Exit option is selected!
In this field the network card used must be entered.
1=>W&T Com-Server
2 = Novar TR/AC Ethernet (Item no. 026840.29)
Change? Y/N:_
This display is used for information only and is not
editable. It shows the firmware version of the device.
Example: Softw: ZACS8.01.00.00
Date:
Press <Enter>
This information should initially be checked since the
functions described depend on the firmware.
the content of the error log file. This is located in a
reserved internal memory area, in which irregular or fault
events are listed. Access to this file is reserved for
approved service personnel.
If this log file is to be cleared and a new one
started, the previous content can be deleted
using this function.
Installation Instructions / ACS-8
02.01.02