22
6.6
Calculation examples
6.6.1 Example 1:
Calculation of the line cross-section for door 3 with given cable length.
The ACS-8 is equipped with two communication modules.
ACS-8 with battery.
A terminating resistor must be connected at the I/O-modules at the end of the bus (marked with XX
in the drawing).
The power supply for the module electronics is in the same multi-core cable as the bus.
A separate line must be used for the power supply of the door strike.
The door 3 to be calculated is connected to the communication module with a single cable.
Installation Instructions / ACS-8