Set Up As-Sip - Cisco 7800 Series Administration Manual

Set up AS-SIP

Field
Allow EnergyWise Overrides
Step 4
Select Save.
Step 5 Select Apply Config.
Step 6
Restart the phone.
Set up AS-SIP
Depending on how you have configured your phone system, you may be able to make priority calls using the
Assured Services for SIP Lines (AS-SIP) feature.
With this feature, routine calls are placed normally. However, during an emergency, you can select a priority
level that helps ensure the delivery of critical calls. Depending upon how your phone is configured, you may
have to sign-in also.
When you receives a priority call, a precedence level icon displays next to the caller's name on your phone.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile.
Step 2 Select a profile.
Step 3
Set the Is Assured SIP Service Enabled check box.
This setting provides specific Assured Service behavior that affects services such as Conference factory and
SRTP.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
126
Description
This check box determines whether you allow the EnergyWise domain controller policy to send
power level updates to the phones. The following conditions apply:
• One or more days must be selected in the Enable Power Save Plus field.
• The settings in Cisco Unified Communications Manager Administration take effect on
schedule even if EnergyWise sends an override.
For example, assuming the Phone Off Time is set to 22:00 (10:00 p.m.), the value in the Phone
On Time field is 06:00 (6:00 a.m.), and the Enable Power Save Plus has one or more days selected.
• If EnergyWise directs the phone to turn off at 20:00 (8:00 p.m.), that directive remains in
effect (assuming no phone user intervention occurs) until the configured Phone On Time at
6:00 a.m.
• At 6:00 a.m., the phone turns on and resumes receiving the power level changes from the
settings in Unified Communications Manager Administration.
• To change the power level on the phone again, EnergyWise must reissue a new power level
change command.
To disable Power Save Plus, you must uncheck the Allow EnergyWise Overrides check
Note
box. If the Allow EnergyWise Overrides remains checked but no days are selected in
the Enable Power Save Plus field, Power Save Plus is not disabled.
Cisco IP Phone Administration