Add Phones With A Bat Phone Template; Add Users To Cisco Unified Communications Manager - Cisco 7800 Series Administration Manual

Cisco IP Phone Installation
Step 3
Select the phone type.
Step 4 Select Next.
Step 5
Complete the information about the phone including the MAC Address.
For complete instructions and conceptual information about Cisco Unified Communications Manager, see
the documentation for your particular Cisco Unified Communications Manager release.
Step 6 Select Save.
Related Topics

Add Phones with a BAT Phone Template

The Cisco Unified Communications Bulk Administration Tool (BAT) enables you to perform batch operations,
including registration of multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you must obtain the appropriate MAC address
for each phone.
For more information about using BAT, see the documentation for your particular Cisco Unified
Communications Manager release.
Procedure
Step 1 From Cisco Unified Communications Administration, choose Bulk Administration > Phones > Phone
Template.
Step 2 Click Add New.
Step 3
Choose a Phone Type and click Next.
Step 4 Enter the details of phone-specific parameters, such as Device Pool, Phone Button Template, and Device
Security Profile.
Step 5 Click Save.
Step 6
Select Device > Phone > Add New to add a phone using the BAT phone template.
Related Topics

Add Users to Cisco Unified Communications Manager

You can display and maintain information about the users registered in Cisco Unified Communications
Manager. Cisco Unified Communications Manager also allows each user to perform these tasks:
• Access the corporate directory and other customized directories from a Cisco IP Phone.
• Create a personal directory.
• Set up speed dial and call forwarding numbers.
Cisco Unified Communications Manager
Cisco Unified Communications Manager
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Add Phones with a BAT Phone Template
Documentation, on page xiii
Documentation, on page xiii
61