Cisco 7800 Series Administration Manual page 129

Cisco IP Phone Administration
Field Name Field Type
or Choices
PC Port Remote Disabled
Configuration
Enabled
SSH Access Disabled
Enabled
Incoming Call Toast Integer 3, 4, 5, 6, 7, 8,
Timer 9, 10, 15, 30, 60
seconds
Line Key Barge cBarge
Turn on Softkey
Barge
Off
Ring Locale Default
Japan
TLS Resumption Integer 0–3600 seconds
Timer
FIPS Mode Disabled
Enabled
HOLD/RESUME Key HOLD/RESUME Key
HOLD Key
Default
Disabled
Disabled
5
cBarge
Default
3600
Disabled
HOLD/RESUME
Key
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Description and Usage Guidelines
Allows you to configure the speed and duplex function of the
phone PC port remotely. This enhances the performance for
large deployments with specific port settings.
If the ports are configured for Remote Port Configuration in
Cisco Unified Communications Manager, the data cannot be
changed on the phone.
Controls the access to the SSH daemon through port 22.
Leaving port 22 open leaves the phone vulnerable to Denial
of Service (DoS) attacks.
Gives the time, in seconds, that the toast displays. The time
includes the fade-in and fade-out times for the window.
Controls the ability for a user to join a nonprivate call on a
shared phone line.
• cBarge—Enables a user to add another person to a call.
The call automatically converts to a conference, allowing
the user and other parties to access conference features.
• Turn on Softkey—Enables a user to conference into a call
on a shared line using cBarge.
• Barge—Enables a user to add another user to a call but
does not convert the call into a conference.
• Off—Disables barge. A new call initiates when the user
presses the line key.
Controls the ringing pattern.
Controls the ability to resume a TLS session without repeating
the entire TLS authentication process. If the field is set to 0,
then the TLS session resumption is disabled.
Enables or disables the Federal Information Processing
Standards (FIPS) mode on the phone.
Controls the text for the Hold softkey.
• HOLD/RESUME Key—The softkey displays
Hold/Resume.
• HOLD Key—The softkey displays Hold.
Product Specific Configuration
115