Customize The Dial Tone - Cisco 7800 Series Administration Manual

Cisco IP Phone Administration
In addition, see the documentation for your particular Cisco Unified Communications Manager release for
the following information:
• Specifying the URL of the idle display XML service:
• Specifying the length of time that the phone is not used before the idle display XML service is invoked:
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone
Step 2
In the Idle field, enter the URL to the idle display XML Service.
Step 3 In the Idle Timer field, enter the time that the idle phone waits before displaying the idle display XML service.
Step 4
Select Save.
Related Topics

Customize the Dial Tone

You can set up your phones so that users hear different dial tones for internal and external calls. Depending
upon your needs, you can choose from three dial tone options:
• Default: A different dial tone for inside and outside calls.
• Inside: The inside dial tone is used for all calls.
• Outside: The outside dial tone is used for all calls.
Always Use Dial Tone is a required field on Cisco Unified Communications Manager.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select System > Service Parameters.
Step 2 Select the appropriate Server.
Step 3
Select Cisco CallManager as the Service.
• For a single phone: Idle field in the Phone Configuration window in Cisco Unified Communications
Manager Administration.
• For multiple phones simultaneously: URL Idle field in the Enterprise Parameters Configuration
window, or the Idle field in the Bulk Administration Tool (BAT)
• For a single phone: Idle Timer field in the Phone configuration window in Cisco Unified
Communications Manager Administration.
• For multiple phones simultaneously: URL Idle Time field in the Enterprise Parameters Configuration
window, or the Idle Timer field in the Bulk Administration Tool (BAT)
Cisco Unified Communications Manager
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Documentation, on page xiii
Customize the Dial Tone
85