Cisco 7800 Series Administration Manual page 192

Hide thumbs Also See for 7800 Series:
Table of Contents

Advertisement

Network Setup
Item
IPv6 Load Server
IPv6 Log Server
IPv6 CAPF Server
DHCPv6
IPv6 Address
IPv6 Prefix Length
IPv6 Default Router 1
IPv6 DNS Server 1
IPv6 DNS Server 2
IPv6 Alternate TFTP
IPv6 TFTP Server 1
IPv6 TFTP Server 2
IPv6 Address Released
Energywise Power Level
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
178
Cisco IP Phone Troubleshooting
Description
Used to optimize installation time for phone firmware
upgrades and off load the WAN by storing images
locally, negating the need to traverse the WAN link
for each phone's upgrade.
Indicates the IPv6-only address and port of the remote
logging machine to which the phone sends log
messages.
Common Name (from the Cisco Unified
Communications Manager Certificate) of the CAPF
used by the phone.
Dynamic Host Configuration Protocol (DHCP)
automatically assigns IPv6 address to devices when
you connect them to the network. Cisco Unified IP
Phones enable DHCP by default.
Displays the current IPv6-only address of the phone
or allows the user to enter a new IPv6 address.
Displays the current prefix length for the subnet or
allows the user to enter a new prefix length.
Displays the default router used by the phone or
allows the user to enter a new IPv6 default router.
Displays the primary DNSv6 server used by the phone
or allows the user to enter a new server.
Displays the secondary DNSv6 server used by the
phone or allows the user to set a new secondary
DNSv6 server.
Allows the user to enable the use of an alternate
(secondary) IPv6 TFTP server.
Displays the primary IPv6 TFTP server used by the
phone or allows the user to set a new primary TFTP
server.
Displays the secondary IPv6 TFTP server used if the
primary IPv6 TFTP server is unavailable or allows
the user to set a new secondary TFTP server.
Allows the user to release IPv6-related information.
A measure of the energy consumed by devices in an
EnergyWise network.
The Cisco IP Phone 7811 does not support Energywise
Power Level.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7821781178617841

Table of Contents