Cisco 7800 Series Administration Manual page 157

Cisco IP Phone Administration
Feature
Group Pickup
Hold
Hunt Group
Join
Malicious Call
Identification
Meet Me
Mobile Connect
New Call
Other Pickup
PLK Support for
Queue Statistics
Quality Reporting
Tool
Recents
Redial
Remove Last
Conference
Participant
Resume
Speed Dial
Transfer
Video Mode
Command
Cisco Unified Communications Manager allows you to configure any softkey in a softkey template, but
unsupported softkeys do not display on the phone.
Configurable softkeys
in the Softkey
Template configuration
Group PickUp
(GPickUp)
Hold (Hold)
HLog (HLog)
Join (Join)
Toggle Malicious Call
Identification (MCID)
Meet Me (MeetMe)
Mobility (Mobility)
New Call (NewCall)
Other Pickup (oPickup)
Queue Status
Quality Reporting Tool
(QRT)
Recents
Redial (Redial)
Remove Last
Conference Participant
(Remove)
Resume (Resume)
Abbreviated Dial
(AbbrDial)
Direct Transfer
(DirTrfr)
Video Mode Command
(VidMode)
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Support Notes
status
Yes Configure as a programmable line button or
softkey
Yes Hold is a dedicated button.
Yes Configure as a programmable line button or
softkey.
No
Yes Configure as a programmable feature button
or softkey.
Yes Configure as a programmable feature button
or softkey.
Yes Configure as a programmable feature button
or softkey.
Yes Phone displays New Call.
Yes Configure as a programmable feature button
or softkey.
Yes -
Yes Configure as a programmable feature button
or softkey.
Yes Enables/Disables the softkey.
Yes -
Yes Phone displays Remove when a participant is
selected.
Yes Resume is a dedicated button.
Yes Phone displays SpeedDial.
Yes This feature is supported as a soft key or a
dedicated button.
No -
Set Up Softkey Template
143