Configure Phone Services For Users - Cisco 7800 Series Administration Manual

Cisco IP Phone Installation

Configure Phone Services for Users

You can give users access to Cisco IP Phone Services on the IP phone. You can also assign a button to different
phone services. The IP phone manages each service as a separate application.
Before a user can access any service:
• You must use Cisco Unified Communications Manager Administration to configure services that are not
• The user must subscribe to services by using the Cisco Unified Communications Self Care Portal. This
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
Before you set up services, gather the URLs for the sites that you want to set up and verify that users can
access those sites from your corporate IP telephony network. This activity is not applicable for the default
services that Cisco provides.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Services.
Step 2 Verify that your users can access the Cisco Unified Communications Self Care Portal, from which they can
select and subscribe to configured services.
See Self Care Portal Management, on page 67
end users.
Related Topics
Cisco IP Phone Does Not Go Through the Normal Startup
present by default.
web-based application provides a graphical user interface (GUI) for limited, end-user configuration of
IP phone applications. However, a user cannot subscribe to any service that you configure as an enterprise
subscription.
Cisco Unified Communications Manager
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Process, on page 191
for a summary of the information that you must provide to
Documentation, on page xiii
Configure Phone Services for Users
53