Cisco 7800 Series Administration Manual page 177

Cisco IP Phone Troubleshooting
Item
Tx broadcast
Tx unicast
Rx Frames
Rx broadcast
Rx unicast
CDP Neighbor Device ID
CDP Neighbor IP Address
CDP Neighbor IPv6 Address
CDP Neighbor Port
Restart Cause: One of these values:
• Hardware Reset (Power-on reset)
• Software Reset (memory controller also reset)
• Software Reset (memory controller not reset)
• Watchdog Reset
• Unknown
Port 1
Port 2
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Description
Number of broadcast packets sent by the phone
Total number of unicast packets transmitted by the
phone
Number of packets received by the phone
Number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered
by CDP protocol.
Identifier of a device connected to this port discovered
by CDP protocol using IP.
Identifier of a device connected to this port discovered
by CDP protocol using IPv6.
Identifier of a device connected to this port discovered
by CDP protocol.
Cause of the last reset of the phone
Link state and connection of the PC port (for example,
Auto 100 Mb Full-Duplex means that the PC
port is in a link-up state and has auto-negotiated a
full-duplex, 100-Mbps connection)
Link state and connection of the Network port
Network Statistics Fields
163