Cisco 7800 Series Administration Manual page 131

Cisco IP Phone Administration
Field Name Field Type
or Choices
Wideband Headset UI Disabled
Control
Enabled
Wideband Headset Disabled
Enabled
Detect Unified CM Normal
Connection Failure
Delayed
Special Requirement String
ID
Console Access Disabled
Enabled
Actionable Incoming Disabled
Call Alert
Show for all Incoming
Call
Show for Invisible
Incoming Call
Default
Enabled
Enabled
Normal
Disabled
Show for all
Incoming Call
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Description and Usage Guidelines
Allows the user to use the wideband codec for an analog
headset.
Enables or disables the use of a Wideband Headset on the
phone. Used in conjunction with User Control Wideband
Headset.
For more information, see Set Up Wideband Codec, on page
83
Determines the sensitivity that the phone has for detecting a
connection failure to Cisco Unified Communications Manager
(Unified CM), which is the first step before device failover to
a backup Unified CM/SRST occurs.
• Normal—Detection of a Unified CM connection failure
occurs at the standard system rate. Choose this value for
faster recognition of a Unified CM connection failure.
• Delayed—Detection of a Unified CM connection failover
occurs approximately four times slower than Normal.
Choose this value if you prefer failover to be delayed
slightly to give the connection the opportunity to
reestablish
The precise time difference between Normal and Delayed
connection failure detection depends on many variables that
are constantly changing.
Controls custom features from Engineering Special (ES) loads.
Specifies whether the serial console is enabled or disabled.
Controls the type of incoming call alert that displays on the
phone screen.
• Disabled—The actionable incoming call alert is disabled
and the user sees the traditional incoming call pop-up
alert.
• Show for all Incoming Call—The actionable incoming
call alert displays for all calls regardless of visibility.
• Show for Invisible Incoming Call—The actionable
incoming call alert displays for calls not shown on the
phone. This parameter behaves similarly to the incoming
call alert pop-up notification.
Product Specific Configuration
117