Cisco IP Phone Administration
View the Current Security Features on the Phone
For more information about the security features and about Cisco Unified Communications Manager and
Cisco IP Phone security, see the documentation for your particular Cisco Unified Communications Manager
release.
Procedure
Step 1
Press Applications
Step 2
Select Admin Settings > Security Setup.
Most security features are available only if a certificate trust list (CTL) is installed on the phone.
Related Topics
View Security Profiles
All Cisco IP Phones that support Cisco Unified Communications Manager use a security profile, which defines
whether the phone is nonsecure, authenticated, or encrypted. For information about configuring the security
profile and applying the profile to the phone, see the documentation for your particular Cisco Unified
Communications Manager release.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select System > Security > Phone Security
Profile.
Step 2
Look at the Security Mode setting.
Related Topics
Supported Security Features
The following table provides an overview of the security features that the Cisco IP Phone 7800 Series support.
For more information about these features, Cisco Unified Communications Manager and Cisco IP Phone
security, see the documentation for your particular Cisco Unified Communications Manager release.
.
Cisco Unified Communications Manager
Cisco Unified Communications Manager
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
View the Current Security Features on the Phone
Documentation, on page xiii
Documentation, on page xiii
73