Cisco 7800 Series Administration Manual page 161

Cisco IP Phone Administration
Use the information in the following table as a guide when configuring the headset parameters.
Table 28: Cisco Headset Parameters and Default Settings
Parameter
Speaker Volume
Microphone Gain
Sidetone
Equalizer
Audio Bandwidth
Bluetooth
(Multibase only)
Range
0-15
0 (+6dB) - 4 (-6dB)
0 (Off) - 3 (high)
0 (Warmest) - 6
(Brightest)
1 (Narrow Band), 0 (Wide
Band)
0 (On), 1 (Off)
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Remote Configuration of Headset Parameters
Default Notes
7 -
2 Gain controls how loud
the user sounds to other
people on the call.
1 Sidetone is the term for
when you hear your own
voice in your headset.
Some people find it
distracting to hear their
own voice during a call,
while other people want
to know that their headset
is working.
3 If you like a headset with
a lot of bass, then adjust
toward the warm setting.
If you prefer more treble,
then adjust toward the
bright setting.
0 When you set the
bandwidth to narrow,
Standard Base and
Multibase headsets are
limited to the DECT
codec G.726. Set the
audio bandwidth to
Narrow Band if your
wireless headsets are used
in a dense DECT
environment.
0 Bluetooth is only
supported on Cisco
Headset 561 and 562 with
Multibase. If you do not
plan to use Bluetooth,
then we recommend that
you disable this setting.
147