Enable Blf For Call Lists; Enable Device Invoked Recording; Ucr 2008 Setup - Cisco 7800 Series Administration Manual

Cisco IP Phone Administration

Enable BLF for Call Lists

Procedure
Step 1 In the Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2
From the BLF for Call Lists drop-down list box, choose the applicable profile.
By default, the feature is disabled.
Parameters that you set in the Product Specific Configuration area may also appear in the Device Configuration
window for various devices and in the Enterprise Phone Configuration window. If you set these same parameters
in these other windows as well, the setting that takes precedence is determined in the following order:
1. Device Configuration window settings
2. Common Phone Profile window settings
3. Enterprise Phone Configuration window settings
Step 3
Select Save.

Enable Device Invoked Recording

Configure the Device Invoked Recording feature from Cisco Unified Communications Manager Administration.
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
Procedure
Step 1 Set the IP Phone Built In Bridge parameter to On.
Step 2
In the Line Configuration page, set Recording Option to Selective Call Recording Enabled and select the
appropriate Recording profile.
Related Topics

UCR 2008 Setup

The parameters that support UCR 2008 reside in Cisco Unified Communications Manager Administration.
The following table describes the parameters and indicates the path to change the setting.
Cisco Unified Communications Manager
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Documentation, on page xiii
Enable BLF for Call Lists
131