Cisco Nexus 7000 Series Command Reference Manual page 42

ip lisp etr
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
This example shows how to configure the IPv4 LISP ETR functionality on the Cisco NX-OS device:
Examples
switch# configure terminal
switch(config)# ip lisp etr
Related Commands Command
ip lisp
database-mapping
ip lisp itr-etr
ip lisp etr map-server
ip lisp itr
ip lisp map-cache
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-32
Description
Specifies to configure an IPv4 EID-to-RLOC mapping relationship and its
associated traffic policy.
Configures the router to act as an IPv4 LISP Ingress Tunnel Router (ITR)
and an IPv4 LISP Egress Tunnel Router (ETR) with one command.
Configures the IPv4 or IPv6 locator address of the LISP Map-Server to
which an ETR should register for its IPv4 EID prefixes.
Configures the Cisco NX-OS device to act as an IPv4 LISP Ingress Tunnel
Router (ITR).
Configures a static IPv4 EID-prefix to locator map-cache entry.
Cisco Nexus 7000 Series LISP Commands