Show Ip Lisp Map-Cache - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show ip lisp map-cache

To display the current dynamic and static IPv4 endpoint identifier to Routing Locator (EID-to-RLOC)
map-cache entries, use the show ip lisp map-cache command.
Syntax Description destination-EID
destination-EID-pr
efix/prefix-length
vrf vrf-name
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
The show ip lisp map-cache command is used to display the current dynamic and static IPv4
Usage Guidelines
EID-to-RLOC map-cache entries. When no IPv4 EID or IPv4 EID-prefix is specified, a summary of
information is listed for all current dynamic and static IPv4 EID-to-RLOC map-cache entries. When an
IPv4 EID or IPv4 EID-prefix, information is listed for the longest-match lookup in the cache. When you
use the vrf keyword, summary information related to the referenced vrf name is listed.
This command does not require a license.
This example shows how to display a summary list of current dynamic and static IPv4 EID-to-RLOC
Examples
map-cache entries:
switch# show ip lisp map-cache
LISP IP Mapping Cache for VRF "default", 4 entries
153.16.1.0/24, uptime: 04:41:40, expires: 19:18:19, via map-reply, auth
Locator
129.250.1.255
OL-25345-01
show ip lisp map-cache [destination-EID | destination-EID-prefix/prefix-length | vrf vrf-name]
(Optional) Destination EID to display mapping for.
(Optional) Destination EID-prefix to display mapping for.
(Optional) Displays detailed EID-to-RLOC cache mapping information for the
referenced virtual routing and forwarding (VRF).
Modification
This command was introduced.
Uptime
04:41:40
State Priority/
Weight
up 254/0
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ip lisp map-cache
Data Control
in/out in/out
0/0 0/0
LSP-165