Lisp Instance Id - Cisco Nexus 7000 Series Command Reference Manual

lisp instance id

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
lisp instance id
To configure an instance ID to be associated with endpoint identifier (EID)-prefixes for a Locator/ID
Separation Protocol (LISP) xTR, use the lisp instance-id command. To disable this functionality, use
the no form of this command.
Syntax Description
iid
None
Defaults
Global configuration mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
Virtualization support is currently available in LISP xTRs and Map Server (MS) and Map Resolver
Usage Guidelines
(MR). The instance ID has been added to LISP to support virtualization.
Use this command to configure the instance ID associated with this xTR. Only one instance ID can be
configured per EID virtual routing and forwarding (VRF) context. When an instance ID is configured,
this instance ID is included with the EID prefixes when they are registered with the Map Server. The
Map Server must also include the same instance ID within the EID-prefix configurations for this LISP
site. You can configure instance IDs on the MS by using the eid-prefix command in the lisp site
command mode.
Virtualization support is not currently available for the LISP ALT, which means that it is also not
Note
supported on LISP PITRs.
This command does not require a license.
This example shows how to configure an instance ID on this xTR:
Examples
switch# configuration terminal
switch(config)# lisp xtr instance-id 123
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-138
lisp instance-id iid
no lisp instance-id iid
Instance ID for this xTR. The range is from 1 to 16777215.
Modification
This command was introduced.
Cisco Nexus 7000 Series LISP Commands