Show Ip Lisp Database - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show ip lisp database

To display LISP ETR configured local IPv4 EID-prefixes and associated locator sets, use the show ip
lisp database command in privileged EXEC mode.
Syntax Description vrf vrf-name
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ip lisp database command on LISP ETR devices to display the configured local IPv4
Usage Guidelines
EID-prefixes and associated locator set(s).
This command does not require a license.
This example shows how to display the configured local IPv4 EID-prefixes and associated locator set:
Examples
switch# show run
...<skip>...
!
ip lisp database-mapping 192.168.12.0/24 172.22.156.23 priority 1 weight 100
!
switch# show ip lisp database
LISP ETR IP Mapping Database for VRF "default" (iid 0), global LSBs: 0x00000001
EID-prefix: 192.168.12.0/24, instance-id: 0, LSBs: 0x00000001
Locator: 172.22.156.23, priority: 1, weight: 100
switch#
OL-25345-01
show ip lisp database [vrf vrf-name]
Displays information for the specified VRF.
Modification
This command was introduced.
Uptime: 10:36:59, state: up, local
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ip lisp database
LSP-161