Show Ip Lisp Locator-Hash - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show ip lisp locator-hash

To display source and destination locators that are used for a given IPv4 source and destination EID pair,
use the show ip lisp locator-hash command.
Syntax Description source-EID
dest-EID
dest-EID-prefix
vrf vrf-name
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ip lisp database command is used to display the source and destination locators that are
Usage Guidelines
used for a given IPv4 source and destination EID pair as the result of the locator hashing process. The
source locator is chosen based on the source EID from the EID-prefix database configured by using the
ip lisp etr database-mapping command. The destination locator is selected by finding the destination
EID in the EID-to-RLOC map-cache.
When the dest-EID-prefix argument is used, the locator hash array is display, indicating which locator
will be used for each of 25 different flow hash buckets.
When the vrf keyword is used, IPv4 EIDs are resolved within the specified VRF in order to display the
locator-hash.
This command does not require a license.
This example shows how to display source and destination locators that are used for a given IPv4 source
Examples
and destination EID pair:
switch# show ip lisp database
LISP ETR IP Mapping Database for VRF "default", global LSBs: 0x00000001
OL-25345-01
show ip lisp locator-hash {source-EID dest-EID} | dest-EID-prefix} [vrf vrf-name]
IPv4 source EID.
IPv4 destination EID.
IPv4 destination EID-prefix.
(Optional) Specifies the vrf within which to resolve EIDs.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ip lisp locator-hash
LSP-163