Cisco Nexus 7000 Series Command Reference Manual page 13

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
This example shows how to configure the LISP site named Customer-1 and enter the site command
Examples
mode. This example also shows the IPv4 address 172.16.1.1 and the IPv6 address 2001:db8:bb::1 are
configured as allowable locators for the LISP site Customer-1. When Customer-1 registers with this Map
Server, at least one or both of the configured locators must be included in the Map Registration for the
site to register.
switch# configuration terminal
switch(config)# lisp site Customer-1
switch(config-lisp-site)# allowed-locator 172.16.1.1 2001:db8:bb::1
Related Commands Command
lisp site
show lisp site
OL-25345-01
Description
Configures a LISP site and enters site configuration mode on a Map Server.
Displays registered LISP sites on a Map Server.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
allowed-locator
LSP-3