Cisco Nexus 7000 Series Command Reference Manual page 167

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Locator Reachability Algorithms:
Echo-nonce algorithm:
TCP-counts algorithm:
RLOC-probe algorithm:
Static mappings configured:
Map-cache limit:
Map-cache size:
ETR Database, global LSBs: 0x00000001:
EID-prefix: 192.168.12.0/24, LSBs: 0x00000001
switch#
Table 1
Field
Ingress Tunnel Router
(ITR)
Egress Tunnel Router
(ETR)
Proxy-ITR
Map-Resolver (MR)
Map-Server (MS)
Last-resort source
locator
LISP-NAT
Interworking
ITR send Map-Request
ITR send Data-Probe
LISP-ALT vrf
ITR Map-Resolver
ETR Map-Server(s)
Last Map-Register sent
to MS
ETR glean mapping
ETR accept mapping
data
OL-25345-01
Locator: 172.22.156.23, priority: 1, weight: 100
Uptime: 09:27:15, state: up, local
describes the significant fields shown in the display.
Table 1
Description
Whether the router is configured as an ITR. For more information, see the
ip lisp itr command.
Whether the router is configured as an ETR. For more information, see the
ip lisp etr command.
Whether the router is configured as a PITR. For more information, see the
ip lisp proxy-itr command.
Whether the router is configured as a MR. For more information, see the ip
lisp map-resolver command.
Whether the router is configured as a MS. For more information, see the ip
lisp map-server command.
Last-resort source locator for LISP messages.
Whether the router is configured for LISP NAT. For more information, see
the ip lisp translate command.
Whether sending Map-Requests is enabled. For more information, see the
ip lisp itr map-resolver command.
Whether ip lisp itr send-data-probe is enabled.
Whether a LISP-ALT VRF configured and identifies the VRF name. For
more information, see the ip lisp alt-vrf command.
Identifies the configured ITR Map-Resolver. For more information, see the
ip lisp itr map-resolver command.
Identifies the configured ETR Map-Server(s). For more information, see the
ip lisp etr map-server command.
This field indicates when this device last sent a Map-Registration message
to the configured Map-Server(s).
Indicates whether the ETR is configured to glean mapping data contained
in a encapsulated packet. For more information, see the ip lisp etr
glean-mapping command.
Indicates whether the ETR is configured to cache the mapping data
contained in a Map-Request. For more information, see the ip lisp etr
accept-map-request-mapping command.
disabled
disabled
disabled
0
10000
3
show ip lisp Field Descriptors
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ip lisp
LSP-157