Show Ip Lisp - Cisco Nexus 7000 Series Command Reference Manual

show ip lisp

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show ip lisp
To display the IPv4 Locator/ID Separation Protocol (LISP) configuration status, use the show ip lisp
command.
This command has no arguments or keywords.
Syntax Description
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
This command does not require a license.
Usage Guidelines
This example shows how to display information about the current IPv4 LISP configuration status:
Examples
switch# show ip lisp
LISP IP Configuration Information for VRF "default" (iid 0)
Ingress Tunnel Router (ITR):
Egress Tunnel Router (ETR):
Proxy-ITR Router (PTR):
Proxy-ETR Router (PETR):
Map Resolver (MR):
Map Server (MS):
Last-resort source locator:
LISP-NAT Interworking:
ITR send Map-Request:
ITR send Data-Probe:
LISP-ALT vrf:
ITR Map-Resolver:
ETR Map-Server(s):
Last Map-Register sent to MS:
ETR glean mapping:
ETR accept mapping data:
ETR map-cache TTL:
Shortest EID-prefix allowed:
Use Proxy-ETRs:
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-156
show ip lisp
Modification
This command was introduced.
enabled
enabled
disabled
disabled
disabled
disabled
172.22.156.23
disabled
enabled
disabled
not configured
172.22.156.35
172.22.156.35, 172.22.132.89
00:00:45
disabled, verify disabled
disabled, verify disabled
24 hours
/16
172.16.2.1
Cisco Nexus 7000 Series LISP Commands