Clear Ipv6 Lisp Data-Cache Lsp-10 - Cisco Nexus 7000 Series Command Reference Manual

clear ipv6 lisp data-cache
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear ipv6 lisp data-cache
To clear the LISP IPv6 data-cache, use the clear ipv6 lisp data-cache command.
Syntax Description
vrf vrf-name
EID
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
The clear ipv6 lisp data-cache command removes all IPv4 endpoint identifier to Routing Locator
Usage Guidelines
(EID-to-RLOC) mapping in the forwarding data-cache. Data-cache entries are present in two cases only:
when the ip lisp itr send-data-probe command entered, after a data-probe is sent, this data-probe is
stored in the data cache until a Map-Reply is returned, when you enter the ip lisp etr glean-mapping
command, gleaned EID-to-RLOC mapping data is stored in the data cache until the data is verified.
When you use the optional vrf keyword, the data-cache is cleared for the specified VRF. When the EID
option is used, only the EID-to-RLOC mapping for that entry is cleared.
This command does not require a licens.
This example shows how to clear the LISP IPv6 data-cache:
Examples
switch# clear ipv6 lisp data-cache
Related Commands Command
show ipv6 lisp
data-cache
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-10
clear ipv6 lisp data-cache [vrf vrf-name] [EID]
(Optional) Specifies virtual routing and forwarding (VRF) instance with which
to clear the data cache.
(Optional) IPv6 EID to clear from LISP map cache.
Modification
This command was introduced.
Description
Displays the LISP IPv6 EID-to-RLOC data-cache mapping on an ITR.
Cisco Nexus 7000 Series LISP Commands