Register-Database-Mapping - Cisco Nexus 7000 Series Command Reference Manual

register-database-mapping

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
register-database-mapping
To configure the LISP VM switch to register the dynamic-EID prefix from the database-mapping
dynamic-EID subcommand rather than a more-specific host-EID, use the optional
register-database-mapping command. To remove this optional functionality, use the no form of this
command.
This command has no arguments or keywords.
Syntax Description
More-specific (host-EID) prefix is registered with the configured Map Server.
Defaults
Dynamic-EID configuration mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command History Release
5.0(1.13)
Use the register-database-mapping command to cause the LISP VM switch to register the
Usage Guidelines
dynamic-EID prefix from the database-mapping dynamic-EID subcommand rather than
(more-specific) dynamic host-EIDs to the Map Server. By default, host-based dynamic-EIDs are
registered to the Map Server.
You can use the register-database-mapping command to support cloud applications. When a
dynamic-EID matches the dynamic-EID-prefix from the database-mapping dynamic-EID
subcommand, the entire dynamic-EID prefix is registered and all endpoint identifiers (EIDs) are moved
to the new locator-set.
This command does not require a license.
This example shows how to configure the Locator/ID Separation Protocol (LISP) dynamic-EID policy,
Examples
enter the dynamic-EID configuration mode, and configure the policy to register the entire dynamic-EID
prefix instead of individual dynamic host EIDs:
switch# configuration terminal
switch(config)# lisp dynamic-eid Roamer-1
switch(config-lisp-dynamic-eid)# register-database-mapping
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-152
register-database-mapping
no register-database-mapping
Modification
This command was introduced.
Cisco Nexus 7000 Series LISP Commands