Show Ipv6 Lisp Database - Cisco Nexus 7000 Series Command Reference Manual

show ipv6 lisp database

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show ipv6 lisp database
To display Locator/ID Separation Protocol (LISP) egress tunnel router (ETR) configured local IPv6
EID-prefixes and associated locator sets, use the show ip lisp database command.
Syntax Description vrf vrf-name
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ipv6 lisp database command on LISP ETR devices to display the configured local IPv6
Usage Guidelines
EID-prefixes and associated locator set.
This command does not require a license.
This example shows how to display the configured local IPv6 EID-prefixes and the associated locator
Examples
set:
switch# show ipv6 lisp database
LISP ETR IPv6 Mapping Database for VRF "default" (iid 0), global LSBs: 0x0000000f
EID-prefix: 2001:db8:1209::/48, instance-id: 0, LSBs: 0x0000000f
172.22.156.222, priority: 1, weight: 100, state: up, local
switch#
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-174
show ipv6 lisp database [vrf vrf-name]
(Optional) Displays information for the specified virtual routing and forwarding
(VRF).
Modification
This command was introduced.
Cisco Nexus 7000 Series LISP Commands