Show Ipv6 Lisp Data-Cache - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show ipv6 lisp data-cache

To display the Locator/ID Separation Protocol (LISP) IPv6 endpoint identifier to Routing Locator
(EID-to-RLOC) data-cache mapping on an ITR, use the show ipv6 lisp data-cache command.
Syntax Description destination-EID
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ipv6 lisp data-cache command on LISP ITR devices to display the LISP IPv6
Usage Guidelines
EID-to-RLOC data-cache mappings. Data-cache mappings are built when a Map Request is sent and are
maintained until a valid (matching nonce) Map Reply is received. The data-cache entry is then moved
to the map cache.
This command does not require a license.
This example shows how to display the LISP IPv6 EID-to-RLOC data-cache mapping on an ITR:
Examples
switch# show ipv6 lisp data-cache
LISP IPv6 Mapping Data Cache for Context "default", 0 entries, hwm: 1
Complete entries removed after 15-second period: 0
Incomplete entries removed after 1-minute period: 1
switch#
Related Commands Command
ipv6 lisp map-cache
OL-25345-01
show ipv6 lisp data-cache [destination-EID]
(Optional) Destination EID to display mapping for.
Modification
This command was introduced.
Description
Displays the current dynamic and static IPv6 EID-to-RLOC map-cache
entries.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
show ipv6 lisp data-cache
LSP-173