Clear Ipv6 Lisp Statistics Lsp-13 - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear ipv6 lisp statistics
To clear the Locator/ID Separation Protocol (LISP) ingress tunnel router (ITR) and Egress Tunnel
Router (ETR) IPv4 address-family packet count statistics, use the clear ip lisp statistics command.
vrf vrf-name
Syntax Description
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command Historyd. Release
5.0(1.13)
5.0(3.lisp)
The clear ipv6 lisp statistics command clears all of the LISP ITR and ETR IPv4 address-family packet
Usage Guidelines
count statistics. IPv4 address family packet count statistics are maintained for all LISP control plane
packets. These packet counters are displayed using the show ipv6 lisp statistics command.
This command does not require a license.
This example shows how to clear the LISP ITR and ETR IPv6 address-family packet count statistics:
Examples
switch# clear ipv6 lisp statistics
switch#
Related Commands Command
show ipv6 lisp
statistics
OL-25345-01
clear ipv6 lisp statistics [vrf vrf-name]
(Optional) Specifies virtual routing and forwarding (VRF) with which to clear
the LISP statistics.
Modification
This command was introduced.
This command was modified.
Description
Displays LISP IPv6 address-family statistics.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
clear ipv6 lisp statistics
LSP-13