Honeywell DR4300 Product Manual page 25

Condition
Input Filter
Case
Pen
Chart
Wiring Connections
Color
Weight
Mounting
Installation Category
(Overvoltage Category)
Pollution Degree
EMC Classification
Dielectric Insulation
Options
Current Output (Isolated)
Electromechanical Relay
Output
3/00
Without Display: Analog with time constant of 3 seconds and digital with time
constant of 1 second.
With Display: Analog with time constant of 3 seconds and digital adjustable 0
seconds to 120 seconds.
Molded, foamed-Noryl with gasketed door to meet NEMA 3 enclosure
requirements.
Disposable fiber-tip ink cartridge, line length per cartridge more than 305 m
[1000 ft]
One Pen: Purple
Two Pen: Purple (pen 1) and red (pen 2)
NOTE: Only pen 1 (purple) is referenced to the chart time line.
262 mm [10.32-inch] diameter chart with standard preprinted markings and a
calibrated width of 100 mm [4 inches].
Screw terminals (2 piece)
Case: Black
Door: Standard—Gray; Optional—Carribean blue or black
5.4 kg [12 lbs]
Panel-, pipe- or surface-mounted
Category II: Energy-consuming Equipment Supplied from the Fixed Installation,
Local Level Appliances, and Industrial Control Equipment (EN61010-1).
Pollution Degree 2: Normally Non-conductive Pollution with Occasional
Conductivity Caused by Condensation (Ref. IEC 664-1).
Group 1, Class A: ISM Equipment (EN55011, emissions), Industrial Equipment
(EN50082-2, Immunity).
AC Main to Inputs/Outputs
Input to Input
Input to Output
(except Digital Input to Current Output)
AC Main to Transmitter Power
Range can be set anywhere between 4 mA and 21 mA, and as direct or reverse
action.
Resolution: 11 bits for 4 mA to 21 mA
Accuracy: 0.5 % full scale
Temperature Stability: 0.1 % F.S./°C
Load Resistance: 0 ohms to 600 ohms
SPDT contacts. Internally socketed.
Resistive Load: 5 A @ 120 Vac or 2.5 A @ 240 Vac or 30 Vdc.
Inductive Load: 50 VA @ 120 Vac or 240 Vac.
Motor: 1/6 H.P.
DR4300 Circular Chart Recorder Product Manual
Specifications
250 Vac
250 Vac
250 Vac
250 Vac
Installation
13