Remote Switch (Digital Inputs) Set Up Group - Honeywell DR4300 Product Manual

DR4300 Circular Chart Recorder

4.3.18 Remote Switch (Digital Inputs) Set Up Group

Introduction
If the hardware supports optional digital inputs, the parameters in this group are used to specify what action
the recorder will take if these "remote switches", triggered by some external event, are closed.
Remote switch group prompts
Table 4-16 lists all the function prompts in the remote switch set up group and their definitions.
For a 2-pen recorder, the desired input channel is displayed on the left side of the operator interface.
Press FUNC to select channel.
Press SETUP key until "REM SW" appears in the lower display.
Press FUNC key to select the parameters.
112 DR4300 Circular Chart Recorder Product Manual 4/00