Table 5-8 Set Up Wiring Procedure For Calibrating Millivolts, Volts, And Milliamps Inputs; Figure 5-5 Calibration Set Up Diagram For Millivolts, Volts, And Milliamps Inputs - Honeywell DR4300 Product Manual

DR4300 Circular Chart Recorder
Millivolts, Volts and Milliamps inputs
Refer to Figure 5-5 and wire the recorder according to the procedure given in Table 5-8.

Table 5-8 Set Up Wiring Procedure for Calibrating Millivolts, Volts, and Milliamps Inputs

Step
1 Connect the copper wire to the calibration source (see Figure 5-5).
Connect the other end of the copper wire to the TB2 terminals on the printed circuit assembly
2
for the input channel being calibrated.

Figure 5-5 Calibration Set Up Diagram for Millivolts, Volts, and Milliamps Inputs

150
Main PCA
Pen 2
TB2
TB1
DR4300 Circular Chart Recorder Product Manual
Action
Main PCA
Pen 1
TB1
TB2
–
R
Calibration source
Copper
wires
TB2
24094
-
+
4/00