Input Calibration Minimum And Maximum Range Values - Honeywell DR4300 Product Manual

DR4300 Circular Chart Recorder

5.2 Input Calibration Minimum and Maximum Range Values

Minimum and maximum range values
You should calibrate the recorder for the minimum (0 %) and maximum (100 %) range values of your
particular sensor. If your recorder has two (pens) inputs, calibrate each input separately.
Make sure the correct input is on display INP1 or INP2; use the
Select the voltage or resistance equivalent for 0 % and 100 % range values from Table 5-1. Use these values
when calibrating your recorder.
142 DR4300 Circular Chart Recorder Product Manual
key to select the input.
FUNC
4/00