Xstatus Network 1 Cdp Duplex; Xstatus Network 1 Cdp Vtpmgmtdomain; Xstatus Network 1 Cdp Address; Xstatus Network 1 Cdp Primarymgmtaddress - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

xStatus Network 1 CDP Duplex

Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network opera-
tors to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end

xStatus Network 1 CDP VTPMgmtDomain

Returns the switch's configured VTP management domain name-string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end

xStatus Network 1 CDP Address

Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

xStatus Network 1 CDP PrimaryMgmtAddress

xStatus Network 1 CDP SysName

xStatus Network 1 CDP SysObjectID

194
xCommand
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.