Xstatus Sip Profile 1 Directoryuri Primary Uri; Standby Status; Xstatus Standby Active - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

xStatus SIP Profile 1 DirectoryURI Primary URI

Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

Standby status

xStatus Standby Active

208
xCommand
Shows if the system is in standby or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Standby Active
*s Standby Active: Off
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.