Cisco TelePresence SX80 Reference Manual page 229

Cisco TelePresence SX80
Contents Introduction
systemtools securitysettings default
Revert to default security settings.
systemtools securitysettings ask
Query for the separate configurations. When issuing this
command you can see each policy separately.
• Press enter to keep the current value.
• Enter a number and press enter to change the given
policy.
• The default value "0" indicates no restrictions.
Max failed login attempts [0]?
• Number of failed logins until a user is set inactive.
Suspend-time after max failed login attempts (minutes) [0]?
• Number of minutes the user is set inactive after maximum
failed login attempts have been exceeded.
Max simultaneous sessions total [0]?
• Maximum number of users that can be logged in simulta-
neous to web and maximum number of users that can be
logged in simultaneous to ssh/Telnet.
Max simultaneous sessions per user [0]?
• Maximum number of simultaneous sessions per user.
Number of passwords to remember [0]?
• Number of previous passwords that the new password
must differ from.
Number of PINs to remember [0]?
• Number of previous PINs that the new PIN must differ
from.
Maximum time between password renewals (days) [0]?
• If the user has not changed the password within the
renewal time the user will be set inactive.
Minimum time between password renewals (hours) [0]?
• The user can only change password once within this limit.
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
Maximum time between PIN renewals (days) [0]?
• If the user has not changed the PIN within the renewal
time the user will be set inactive.
Minimum time between PIN renewals (hours) [0]?
• The user can only change PIN once within this limit.
Maximum time between logins (days) [0]?
• If the user has not logged in within this limit the user will
be set inactive.
Max consecutive equal digits in PINs [0]?
• Maximum consecutive equal digits in PINs.
Minimum number of digits in PINs [0]?
• Minimum number of digits in PINs.
Maximum number of digits in PINs [0]?
• Maximum number of digits in PINs.
Max consecutive identical characters in passwords [0]?
• Maximum consecutive identical characters in passwords.
Minimum number of characters in passwords [0]?
• Minimum number of characters in passwords.
Maxmum number of characters in passwords [0]?
• Maxmum number of characters in passwords.
Minimum number of lower-case letters in passwords [0]?
• Minimum number of lower-case letters in passwords.
Minimum number of upper-case letters in passwords [0]?
• Minimum number of upper-case letters in passwords.
Minimum number of numerical characters in passwords [0]?
• Minimum number of numerical characters in passwords.
Minimum number of special characters in passwords [0]?
• Minimum number of special characters in passwords.
Minimum number of character groups in passwords [0]?
• Minimum number of character groups in passwords.
229
xCommand xStatus
Minimum number of character changed from previous
password [0]?
• Minimum number of character changed from previous
password.
systemtools securitystatus
Shows the security status for the codec.
systemtools selectsw
Select which of the available software images to use.
Changing the software image will restart the codec.
No argument given: Lists the version of the available
software images, and shows which one is active.
image name: Swap to the software with this name.
systemtools sudo on
Changes the user role of the current session to the role of
the specified user
username(r): The name of the sudo user.
password(r): The password for the sudo user.
systemtools sudo off
Reverts back to the user role of the signed in user.
systemtools whoami
Lists the name and id of the signed in user, and the user roles
held by this user.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
API Reference Guide
Appendices Appendices