Cisco TelePresence SX10
Introduction
xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
String
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network 1 CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
String
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xCommand
xStatus Network 1 CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
xStatus Network 1 CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
xStatus Network 1 CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
154
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.