Cisco TelePresence SX80 Reference Manual page 106

Cisco TelePresence SX80
Contents Introduction
xCommand Camera Ramp
Move the camera in a specified direction. The camera moves at specified speed until a stop
command is issued. In a daisy chain, you need to know the CameraId for the camera you want to
address. Be aware that pan and tilt can be operated simultaneously, but no other combinations.
In the latter case only the first operation specified is executed. For example, if you try to run both
zoom and pan at the same time, only zoom is executed.
NOTE: You must run a stop command to stop the camera, see the example below.
CameraId: Give the camera id.
Pan: Move the camera to the Left or Right, followed by Stop.
PanSpeed: Set the pan speed.
Tilt: Move the camera Up or Down, followed by Stop.
TiltSpeed: Set the tilt speed.
Zoom: Zoom the camera In or Out, followed by Stop.
ZoomSpeed: Set the zoom speed.
Focus: Focus the camera Far or Near, followed by Stop.
Requires user role: USER
Parameters:
CameraId(r): <1..7>
Pan: <Left/Right/Stop>
PanSpeed: <1..15>
Tilt: <Down/Up/Stop>
TiltSpeed: <1..15>
Zoom: <In/Out/Stop>
ZoomSpeed: <1..15>
Focus: <Far/Near/Stop>
Example:
xCommand Camera Ramp CameraId:1 Pan:left PanSpeed:1
xCommand Camera Ramp CameraId:1 Pan:stop
xCommand Camera ReconfigureCameraChain
Reinitialize the daisy chain of cameras and updates the CameraId parameter. The CameraId param-
eter holds information of which camera is sitting in what position in the camera chain.
Requires user role: USER
Example:
xCommand Camera ReconfigureCameraChain
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xCommand Camera TriggerAutofocus
106
xCommand xCommand
Trigger the auto-focus functionality. The camera must support auto-focus functionality. If the
camera is daisy chained, the CameraId is given by its place in the chain.
Requires user role: USER
Parameters:
CameraId(r): <1..7>
Example:
xCommand Camera TriggerAutofocus CameraId:1
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.