Cisco TelePresence SX80
Contents
Introduction
API output
The xPreferences is used to set preferences for the RS-232,
Telnet and SSH sessions.
The output modes
•
Terminal: Line based output for use with line based
control systems
•
XML: XML output for use with control systems that
understand XML.
The default output mode is terminal. To change this you
have to define your preferences for each session individually.
Examples in this guide are in terminal mode.
To set ouput mode to XML, issue the command:
xPreferences outputmode xml
To revert to terminal mode, issue the command:
xPreferences outputmode terminal
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API
About the API
xConfiguration
Example: Layout command in terminal mode
xCommand Video Layout AssignCall CallId: 2 LayoutId: 1
Example: Layout command in XML mode
<Command>
<Video>
<Layout>
<AssignCall command="True">
<CallId>2</CallId>
<LayoutId>1</LayoutId>
</AssignCall>
</Layout>
</Video>
</Command>
12
xCommand
xStatus
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
API Reference Guide
Appendices